Bissell CROSSWAVE PET 2225F SERIES User Manual page 13

Clean Brush Roll and Chamber
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
1
3
With warm water, rinse your
Brush Window and Brush Roll.
TIP: Running your machine with a wet Brush Roll will help the Brush Roll dry
faster. The trigger should not be pressed.
NOTE: The Brush Roll is not dishwasher or automatic washing machine safe.
Please follow cleaning instructions.
6
Replace Brush Roll by inserting the Brush Roll
end into the right side of the foot. Then lock
the pull tab into place by pressing downward.
Grasp Brush
Window at the
front and pull
upward to remove.
4
If your Brush Roll Chamber
is dirty, clean with a rag or
towel.
2
5
Let your Brush Roll and
Brush Window Chamber dry
before reassembling.
7
Replace the Brush Window by first lining up
both brush window tabs with the edges of
the foot. Then press the window back into
place until you hear a click.
Pull Brush Roll out
by grabbing the
Brush Roll tab and
pulling upward.
www.BISSELL.com
13