Operations - Bissell CROSSWAVE PET 2225F SERIES User Manual

Filling the Clean Water Tank
1
The Clean Water Tank is
located on the back of
the machine.
Clean Water Tank
Dirty Water Tank
4
For large area cleaning (up to 65 sq m)
a. Fill Clean Water Tank with warm tap water
to the second water fill line.
b. Then add formula to the second formula
fill line.
5
Screw the cap back onto the Clean Water Tank.
A few notes about filling the clean water tank:
• Fill with warm (140°F/60°C MAX) tap water and add the appropriate
BISSELL solution. DO NOT USE BOILING WATER. DO NOT HEAT WATER
OR TANK IN MICROWAVE.
NOTE: Never put descaling, alcoholic, eucalyptus oil, or detergent products
into the cleaner, as this may damage it or make it unsafe for use.
6
www.BISSELL.com
2
Lift the Clean Water Tank
straight up to remove from
the machine.
For small area cleaning (<32.5 sq m)
a. Fill Clean Water Tank with warm tap water
to the first water fill line.
b. Then add formula to the first formula fill line.
6
3
Unscrew the cap from the
Clean Water Tank.
The Clean Water Tank has
two measuring volumes
depending on the amount
of space you would like
to clean.
On the back of the machine,
align Clean Water Tank with
the grooves and slide tank into
place until you hear a click.