Bissell CROSSWAVE PET 2225F SERIES User Manual page 12

Empty Dirty Water Tank
WARNING
To reduce the risk of fire, electric shock or injury, turn power OFF and disconnect plug from
electrical outlet before performing maintenance or troubleshooting.
9
If the inside area where
the Dirty Water Tank sits is
dirty, wipe it clean with a
rag or towel.
NOTE: Make sure to clean your Dirty Water Tank and let all components dry out
after each use to keep your product at its best.
12
Place Strainer back into
Dirty Water Tank.
12
www.BISSELL.com
10
Leave parts out to dry before
reassembling.
13
Once parts are dry,
reassemble and replace the
top of Dirty Water Tank.
11
Place Vacuum Filter back
into the top of the Dirty
Water Tank.
14
Angle the tank back into
body of machine inserting
bottom first. Then tilt the
top of the tank toward the
machine and push into place
until you hear a click.