Chapter 3 - User's Reference; Settings For The Pc-600 Driver For Windows - Roland ColorCAMM PRO PC-600 User Manual

Chapter 3 - User's Reference

Chapter 3 - User's Reference

3-1 Settings for the PC-600 Driver for Windows

This sends data to the PC-600 from a Windows-based program.
When you are sending data from a commercial draw-type program, make the settings for the cutting parameters with the driver.
For a detailed explanation, see the help screens for the PC-600 driver.
Displaying the Driver Setting Screen
To make the settings for the driver, open Properties.
To open Properties, use the printing menu for the program you're using to set the printer to [Roland PC-600], then click [Properties].
Setting the Material Size
At the [Size] tab, make the setting for the size of the loaded material.
Choose the size of the loaded media.
When you choose the media size with [Sheet Size], the [User Size] values for [Width] and [Length] show the size values. Also, the
[PlotArea] value for the size (the media size area minus margins) appears to the right.
If there is no selection for the size of the loaded media, choose "User Size," then at [User Size], type in the width and length of the
material.
39