Table of Contents
Advertisement
2-10 Powering Off
When not in use for prolonged
periods, unplug the power cord from
the electrical outlet.
Failure to do so may
result in danger of
shock, electrocution,
or fire due to
deterioration of the
electrical insulation.
NOTICE
Do not switch off the main power while printing is in progress. Doing so causes the
printing head to remain in contact with the sheet, which may damage the head.
When switching off the main power, use the [POWER] key to turn off the sub power, make sure the POWER
LED has gone out, and then switch off the main power.
When the unit is not in use, keep the pinch rollers raised. The pinch rollers may be deformed if left engaged.
Before unplugging the power cord, make sure the main power switch have been turned off.
Power Off in Daily Operation
1
Make sure the sheet loading lever
has been raised.
When Not Use for a Prolonged Period
1
Switch off the sub power by
holding down the [POWER]
key until you
hear a beep.
2
Switch off the sub power by holding down the [POWER] key on the
operation panel until you hear a beep.
2
Make sure the flashing
POWER LED has gone out,
then switch off the main
power.
Press the side of
the switch marked
with "
".
Chapter 2 - Basic Operation
The machine goes to sleep when the
time set for auto-sleep elapses with no
operation being performed.
* In everyday use, the main power is
normally always left on and not
switched off.
3
Unplug the power cord from
the electrical outlet.
37
Hide quick links:
Advertisement
Table of Contents
