Part 2 User's Reference; Cutting Area - Roland CAMM-2 PNC-2300 User Manual

Part 2
User's Reference

Cutting Area

The maximum cutting area of the PNC-2300 is 305 mm 230 mm 30 mm (12" 9" 1-1/8"). When converted to coordinate
values, this corresponds to (x, y, z) = (30500, 23000, 3000) when the coordinate unit is 0.01 mm, or (x, y, z) = (12200, 9200, 3000) when
the coordinate unit is 0.025 mm. Changing the coordinate unit causes only the coordinate units for the X and Y axes to change. The
coordinate unit along the Z axis is always 0.01 mm/step.
The actual available cutting area is subject to restrictions according to the length of the attached cutter and the workpiece height; and in
some cases it may be larger than the maximum operating area.
+Y
+Z
230 mm
30 mm
+X
(9")
(1-1/8")
305 mm
(12")
19