Pfaff 1591 Instruction Manual page 56

Input
 Defi ne the feed motion for the feed wheel
 Defi ne the feed motion for the roller presser
 The current seam program can be rolled through via the functions.
 Opens the menu for entering the seam start, see chapter 9.08 Entering start and end
 Or insert the seam zone.
 Or delete the current seam zone.
 Defi ne seam or programming end.
 Complete the fi rst seam zone and change to the next seam zone.
 End the input and change to programmed sewing.
56
This is used to display and change the current values for the feed motion of the feed
wheel.
The difference with respect to the feed motion of the feed wheel (basic stitch length) de-
termines the fullness.
The current seam zone is displayed accordingly alongside all other current values.
backtacks.
The current seam zone is copied and all subsequent seam zones are set backwards.