Table of Contents
Advertisement
Emergency monitor
Use this menu to setup video transfer to the emergency monitor on a remote PC in emergency situations or when an
event is detected. In order to utilize this feature, you must confi gure the address of the remote PC, the port number,
streaming duration, and notifi cation item.
1
1 List
Add: Click to add a new emergency monitor setup
to the list.
Edit: Click to edit and update a emergency monitor
setup.
Del: Click to remove the selected emergency
monitor connection info.
2 Name
Enter the name of the emergency monitor setup
you wish to add to the list.
3 Remote Address
Address: Enter the IP address of the emergency
monitor-installed remote PC.
Port: Enter the emergency monitor's port number.
(Standard: 12005)
4 Emergency Stream Transfer Time
Confi gure how long you wish to stream the video
feed in the event or an emergency of event detec-
tion.
42_ System Setup
2
5 Condition Setting
Select which notifi cations will transmit video feed
to the remote PC's emergency monitor.
Emergency: Select to use the DVR preset
emergency setup confi guration.
Event: Select to custom confi gure motion detection,
video loss, and sensor channels.
motion: Select the channels you wish to stream
video feeds to the remote PC's emergency
monitor when a motion detection event
takes place.
Video Loss: Select the channels you wish to
stream video feeds to the remote PC's
emergency monitor when video loss is
detected.
Alarm In: Select the channels you wish to
stream video feeds to the remote PC's
emergency monitor when a sensor (Alarm
In) detection event takes place.
3
4
5
Advertisement
Table of Contents
