Event - Samsung SHR-9716 User Manual

EVENT

motion Detection
These settings are used to commence recording when motion is detected within a user-defi ned zone. You can optimize
the recording environment by associating PTZ devices, alarms, and cameras to motion detection events.
1
4
6
8
1 Video Display window
This window is used to defi ne the motion detec-
tion zone for the selected video feed. Select the
desired motion detection zone by dragging your
mouse over the screen.
Set motion Detection Zone:
Left-click on or drag over the desired motion
detection zone with your mouse. The motion
selected areas are highlighted by a green color.
Deactivate motion Detection Zone:
Right-click on or drag over the motion detection
zone you wish to deactivate.
2 Zone setting
Block Count: Use to designated the number of
blocks in the motion detection zone
grid.
Sensitivity: Use to select the sensitivity of motion
detection.
Set All Area: Selects the whole screen for motion
detection.
Erase All Area: Clears the screen of any motion
blocks.
3 Rec time
Pre rec time: Use to confi gure how long to record
for leading up to a motion detection
event.
Post rec time: Use to confi gure how long to record
for following a motion detection
event.
32_ System Setup
4 Action Setting
Full Screen: Enable or disable full screen display
of video feed when a motion event
occurs.
Beep: Enable or disable the buzzer for events.
5 Linked pTZ:
Camera: Use to associate a PTZ to the motion
detection camera channel. When a motion
detection event takes place, this feature
moves the selected PTZ to a preset
position.
Preset: Use to select the desired PTZ preset.
6 Spot Full Up
Enable or disable full screen spot monitor pop up
of the video feed when a motion event occurs.
Dwell Time: Use to confi gure the duration for
displaying the camera on the spot port.
7 Linked Camera
Link other cameras to record when the selected
camera detects motion. Multiple cameras can be
selected to be linked via motion.
8 Apply to
The selected channel setting value can be applied
to all or selected channels.
9 Linked Alarm Out
Link Alarm Outs to trigger on motion detection in
camera, multiple alarms can be linked via motion.
2
3
5
7
9