remote devices
You can adjust the ID for a remote control to be used in connection with NVR.
[menu] [enTer] ▼ <menu> [enTer] ▼ <device> ►▼ <remote device>
[enTer] ▲▼◄► [enTer]
• Remote control: Select whether to use a remote control.
• ID: Select an ID number linked to a camera.
If the remote control ID does not match, it will not operate properly.
To change the remote control ID, refer to "Changing the Remote Control ID". (Page 16)
`
M
monitor
You can set the information displayed on the monitor as well as the output system.
monitor settings
You can configure the monitor output-related settings including the displayed information, dwell time and output
system.
[menu] [enTer] ▼ <menu> [enTer] ▼ <device> ►▼ <monitor> ▲▼◄►
[enTer]
• Event Display : Sets the dwell time of the event channel display on the monitor when an event occurs.
If you set it to <Continuous>, it will continue to display, until you press the [ALArm] button to cancel it.
• Display : Displays only checked items on the monitor screen.
• Sequence switching time : Set the automatic switching time for the segmented screen in live mode.
English _85