Buzzer Output - Samsung SHR-1041 User Manual

settings

Buzzer output

. In the <system setup> window, use the direction
buttons ($%_+/ENTER) to select <event/sensor>.
. Select <Buzzer output> and use the direction buttons
($%_+/ENTER) to select and set a desired item.
operation : Set the operation of the buzzer output.
•
- n/o(Normal Open): Sensor is open in normal condition,
it generates alarm if the sensor is closed.
hdd event : Set the buzzer output if a HDD event
•
occurs.
mode : Set the output mode of the buzzer.
•
- If set to <Latched>, the buzzer will sound for as much time as defi ned in DURATION.
- If set to <transparent>, the DURATION item will be disabled.
duration : Set the duration of the buzzer output.
•
- If you select <until>, the buzzer will be stopped when you press any button on the front panel or the
remote control.
aLarm, video Loss, motion : Set the buzzer output for each channel if an event of alarm, video
•
loss or motion detection occurs.
. When your settings are completed, click <appLy> on the bottom.
Your settings will be applied.
e-maiL notiFication
. In the <system setup> window, use the direction
buttons ($%_+/ENTER) to select <event/sensor>.
. Select <e-maiL notiFication> and use the direction
buttons ($%_+/ENTER) to select and set a desired item.
notiFication : Turn on or off the notifi cation of an
•
event if it occurs.
- If set to <on>, the applicable menu is activated where
you can set other options.
- If set to <oFF>, other items will be disabled.
• hdd event : Turn on or off the notifi cation of a HDD
event if it occurs.
Booting event : Turn on or off the notifi cation of an email when the system boots.
•
aLarm, video Loss, motion : Set the event notifi cation for each channel if an event occurs such
•
as alarm, video loss or motion detection.
• FreQuency : Set the notifi cation interval for events occurred. (10MIN~30MIN, Default: 30MIN)
. When your settings are completed, click <appLy> on the bottom.
Your settings will be applied.
.
When done, if you want to move to the previous menu, press the [return] button on the front panel or
CAM1
the remote control, or click <
M
A photo taken in a low contrast scene naturally causes a lot of noise, and often occurs an unnecessary motion event,
which may cause damage to the camera set. In such case, set a function of E-MAIL NOTIFICATION to OFF, or set
FREQUENCY to a longer time (ex: 30 MIN).
You are recommended to use a night vision camera in a low contrast scene.
CAM1
_ settings
> on the top right corner.
CAM1 CAM1
EVENT/SENSOR
HDD
EVENT OPERATION DISABLE
MODE LATCHED
ALARM
INPUT
ALARM VIDEO LOSS
1
ALARM
OUTPUT
2
CAM1 3 CAM1
BUZZER
4
OUTPUT
E-MAIL
NOTIFICATION
CAM1 CAM1
EVENT/SENSOR
HDD
NOTIFICATION
EVENT
HDD EVENT
ALARM BOOTING EVENT
INPUT
ALARM VIDEO LOSS
1
ALARM
OUTPUT
2
CAM1 3 CAM1
BUZZER
4
OUTPUT
FREQUENCY
E-MAIL
NOTIFICATION
HDD EVENT ON
DURATION 5 SEC
MOTION
APPLY UNDO
OFF
ON
ON
MOTION
5 MIN
APPLY UNDO