audio
.
In the <system setup> window, use the direction
buttons ($%_+/ENTER) to select <sound>.
.
Select <audio> and use the up/down buttons
($%/ENTER) to select and set a desired item.
Live audio : Set the audio output.
•
However, the channel that is set to COVERT does not output
sound. (page 26)
•
audio monitoring channeL : Select an audio
channel to monitor among voice signals incoming from
audio ports 1 through 4.
networK audio tx : Turns on or off the function of the network audio output.
•
.
When your settings are completed, click <appLy> on the bottom.
Your settings will be applied.
Buzzer
.
In the <system setup> window, use the direction
buttons ($%_+/ENTER) to select <sound>.
.
Select <Buzzer> and use the up/down buttons
($%/ENTER) to select and set a desired item.
Keypad : Turns on or off the buzzer in manipulation of
•
the front buttons.
remote controL : Turns on or off the buzzer in use
•
of the remote control.
.
When your settings are completed, click <appLy> on the
bottom.
Your settings will be applied.
.
When done, if you want to move to the previous menu, press the [return] button on the front panel or
CAM1
the remote control, or click <
CAM1
> on the top right corner.
CAM1
CAM1
SOUND
AUDIO
LIVE AUDIO
AUDIO MONITORING CHANNEL
BUZZER
NETWORK AUDIO TX
CAM1
CAM1
CAM1
CAM1
SOUND
AUDIO
KEYPAD
REMOTE CONTROL
BUZZER
CAM1
CAM1
ON
CH1
ON
APPLY
UNDO
OFF
OFF
APPLY
UNDO
English _