Samsung SHR-1041 User Manual page 31

time setting in sync with the network time server
① Select a time zone for your area.
② Click <apply> button to apply the selected area.
③ Set the network time server and press the <sync.> button.
④ You can set the time manually if the time server could not set the correct time for your area.
⑤ If you does not follow the instructions above, it may fi nd time related errors with recording and data search.
M
If you set the date/time to the past, you will see a warning message
that prompts you to delete data if there is any in the past time you set.
YES: Deletes the data and applies the time change.
•
• NO: Cancels the change of the date/time.
networK
. In the <system setup> window, use the direction
buttons ($%_+/ENTER) to select <system>.
. Select <networK> and use the direction buttons
($%_+/ENTER) to select and set a desired item.
• dhcp : Set the IP address of the DVR to a dynamic IP.
- If <dhcp> is selected, the setting values of ip
address, gateway, suBnet masK, 1st dns
server and 2nd dns server will be automatically
fi lled.
- If <dhcp> is not selected, you should manually enter
the setting values of ip address, gateway,
suBnet masK, 1st dns server and 2nd dns server.
For the IP address, contact the network administrator.
If you change the network setting, your changes will be applied after the system restarts.
weB service : Set the use of the web server.
•
ddns : Connect to the DVR using a specifi c domain name with no need to manually enter an IP
•
address in the client side.
Refer to "DDNS Setting". (Page 32)
ip address : Enter an IP address.
•
gateway : Enter a gateway address.
•
• suBnet masK : Enter a subnet mask address.
• 1st dns server : Enter the fi rst DNS server address.
• 2nd dns server : Enter the second DNS server address.
• ddns server : This is the address of the Samsung DDNS server that assigns a specifi c domain
name to the set featuring the dynamic IP.
• net cLient port : Indicates a port used when the remote management software program accesses
the DVR.
• weB server port : Indicates a port used to connect to the DVR using the web browser.
max tx speed : Set the network transfer speed.
•
- Select one from 56, 128, 256, 512 Kbps, 1, 2, 4 and 8 Mbps.
The video will be transferred below the set speed, which may differ according to the network
connection status.
CAM1
From 2009/01/01 00:00:10
To 2009/01/01 00:00:06
Overlapped date will be erased
CAM1
YES
CAM1 CAM1
SYSTEM
DATE/TIME
DHCP WEB SERVICE
DDNS
NETWORK
IP ADDRESS
GATEWAY
SUBNET MASK
MAIL
1ST DNS SERVER
CAM1 CAM1
2ND DNS SERVER
USER
DDNS SERVER
MANAGEMENT
NET CLIENT PORT
SYSTEM
WEB SERVER PORT
MANAGEMENT
MAX TX SPEED
CONTROL
DEVICE
CAM1
CAM1
NO
127.0.0.0
127.0.0.1
255.255.255.0
127.0.0.1
127.0.0.1
websamsung.net
6100
80
8 Mbps
APPLY UNDO
English _1