settings
system data
•
- <save> : Applies the setting information in the storage device to the DVR.
Connect the device to store the system data to the USB port.
Select <save> to store the system data.
- <Load> : Stores the setting information of the DVR into the storage device.
Connect the storage device to the USB port of the system.
Select <Load>.
Enter the password in the "Login" dialog.
In the "system data Load" confi rmation window, select <oK>.
•
password : Turns on or off the popup of the "Login" dialog if you access a menu item such as
Search, Archiving, Search Setup and Shutdown in the menu.
M
If you load the system data, your changes will be applied after the system restarts.
.
When your settings are completed, click <appLy> on the bottom.
Your settings will be applied.
controL device
.
In the <system setup> window, use the direction
buttons ($%_+/ENTER) to select <system>.
.
Select <controL device> and use the up/down
buttons ($%/ENTER) to select and set a desired item.
system id : Use the remote control to select a control
•
number from 0 to 99. The default ID is 0.
Refer to "Changing the Remote Control ID". (Page 10)
.
When your settings are completed, click <appLy> on the
CAM1
bottom.
Your settings will be applied.
.
When done, if you want to move to the previous menu, press the [return] button on the front panel or
CAM1
the remote control, or click <
event/sensor
You can confi gure the settings of hdd event, aLarm input, aLarm output, Buzzer output and
e-maiL notiFication.
CAM1
Using the mouse may help easier selection of related items.
CAM1
M
You must press the [RETURN] button for the item selected using the <
different menu item.
1.
In Live screen, right-click any area or press the [menu] button on the front panel or the remote control.
.
Use the up/down buttons ($%/ENTER) to select <system setup>.
You will see the "Login" dialog.
_ settings
CAM1
> on the top right corner.
CAM1
CAM1
SYSTEM
DATE/TIME
SYSTEM ID
1
0
NETWORK
MAIL
CAM1
CAM1
USER
MANAGEMENT
SYSTEM
MANAGEMENT
CONTROL
DEVICE
> buttons before you can move to a
APPLY
UNDO