Using The Timer Programming Feature; Checking A Preset Recording - Samsung SV-DVD54T Instruction Manual

Using the Timer Programming
Feature
The Timer Programming feature allows you to preset
the STB-DVD-VCR to record a programme up to one
month before that programme is to be broadcast. Up to
six programmes can be preset.
Before presetting a recording, check that the
date and time are correct.
1
Insert the cassette and press TIMER on the remote
control.
Result: The Timer method is displayed.
Standard
G-Code
2
Press the OK button to select Standard option.
Result: The TIMER PROGRAMMING menu is
displayed.
3 Press ❿ to select the input source.
4
Select the required station by pressing the
buttons or INPUT SEL. to select the LINE 1, LINE 2
input sources.
5 Press ❿ to select the recording day.
6
Select the required day by pressing the
buttons.
7
Press ❿ to select the recording start time.
8
Select the required hour value by pressing the
or buttons.
❷
9 Press ❿ to select the minutes.
10
Select the required minute value by pressing the
or buttons.
❷
11
Press ❿ to select the recording stop time.
Timer Method
,
❷
or
❷
ENG-21
12
Select the required recording stop time by pressing
the or buttons, following the same procedure
❷
as when selecting the recording start time.
13 Press ❿ to select the recording speed.
14
Press the or buttons to select the SP
❷
(Standard Play), LP (Long Play), Auto (Auto Tape
speed Select) recording speeds.
15
When you have finished, press the RETURN button.
16
Press the STANDBY/ON button to activate the timer.
Result: Before starting recording, the STB-DVD-
VCR compares the timer duration with the
remaining time on the cassette.
Auto Tape Speed select. The STB-DVD-VCR's
"Auto Tape Speed select" function compares the
duration of the timer recording to the actual
recording time remaining on the tape loaded.
If there is insufficient tape to complete a timer
recording in AUTO mode, the STB-DVD-VCR
automatically switches to LP mode to record the
whole programme.

Checking a Preset Recording

You can check your preset recordings:
When you have finished presetting the STB-DVD-
VCR
If you have forgotten which programmes will be
recorded
1
Press TIMER on the remote control.
Result: The timer selection is displayed.
2
Press the OK button to select Standard option.
Result: The TIMER PROGRAMMING menu is
displayed.
3
Press the or buttons to select the required
❷
programme.
4 Press the ➛ or ❿ buttons to select and change any
values as required. For more details, refer to the
previous page.
5
On completion, press RETURN twice.