Maintenance/Cleaning Mode; Accessing Internal Components - Follett 15CI100A Installation, Operation And Service Manual

Maintenance/Cleaning Mode

Cleaning Mode (Dispensing Disabled) - Use when cleaning surface
Entering Cleaning Mode disables the User Interface and allows you to clean
the outside of the dispenser without accidentally dispensing ice.
1 . To enter Cleaning Mode, press and immediately release the
maintenance/clean switch (Fig . 5 .1) so that only "ICE" displays in
the user interface (Fig . 5 .2).
2 . To exit Cleaning Mode, press and immediately release the
maintenance/clean switch so that the ice icon also displays in the
user interface.
Maintenance Mode (All Operations Disabled) - Use when cleaning ice
machine
Entering Maintenance Mode disables all operations and allows you to safely
clean and/or sanitize the ice machine and dispenser.
1 . To enter Maintenance Mode, press and hold the maintenance/clean
switch (Fig . 5 .3) until
2 . To exit Maintenance Mode, press and hold the maintenance/clean
switch until
Note: Entering and exiting Maintenance Mode will reset the six-month
periodic maintenance reminder.

Accessing Internal Components

CAUTION!
Except for routine cleaning and sanitizing, only qualified
technicians should attempt to service or maintain this equipment.
1 . Press and hold the maintenance/clean switch (Fig . 5 .1) until
displays in the user interface (Fig . 5 .2).
2 . Remove (unscrew) chrome ice dispenser chute (Fig . 6 .1).
3 . Remove the drip tray (Fig . 6 .2).
4 . Remove the two screws (Fig . 6 .3) on the front panel (behind the
drip tray).
5 . Remove and set aside the front panel (Fig . 6 .4) . Do not disengage
the plug on the back of the User Interface .
displays in the user interface (Fig . 5 .4).
no longer displays in the user interface.
Fig . 5
2
1
4
3
Fig . 6
1
3
2
4
15CI100A with Rear Drain 9