Energy Saving Mode Setting Method - Brother S-7300A Service Manual

3. FUNCTION SETTINGS

3-4. Energy saving mode setting method

If there are no panel operations made during a specified time (excluding the half stitch key), the display can be set to
automatically switch off.
At this time, the power indicator remains illuminated. This status is called energy saving mode.
No panel
operations made
during specified
time
During energy saving mode, the treadle and the half stitch key will be enabled if the previous screen was a screen at which
sewing is possible.
NOTE:
When the power indicator is illuminated, the sewing machine may still start up even though the screen is switched off.
If you would like to temporarily cancel energy saving mode, press the menu key or the home key.
Energy saving mode will then be canceled and the display will return to the previous screen.
* However, if an error or a lower thread warning occurs during energy saving mode, then in such cases energy saving mode
will be canceled automatically.
21
Normal mode
Energy saving mode
S-7300A
Or