Brother S-7300A Service Manual page 33

Energy saving mode setting example
1 <Switching to memory switch setting mode (Advanced)>
2
<Memory switch setting mode>
3
<Memory switch setting mode exiting method>
4
<Special menu exiting method >
1. While pressing the menu key, turn on the power to switch to the special
menu screen.
2. At the special menu screen, select "Memory switch setting" to switch to
memory switch setting mode.
1. Press the [
(1)
2. Press the[
activated. Here it is set to activate after 5 minutes.
* The initial setting is "OFF" (energy saving mode disabled).
3. Press the OK key to store the memory switch setting. The setting display
(2)
will change from flashing to illuminated.
・ Press the return key to return to the special menu screen.
At the special menu screen, press the home key to close the special menu
・
and switch to the home screen.
] or [ ] key to set the memory switch number (1) to "353".
] or [ ] key to set the time (2) until energy saving mode is
S-7300A
3. FUNCTION SETTINGS
22