Advanced Guide For Oem Procedure And Application Development Using; Analyzing Frequency Response In Honeycomb Composite - Selecting The Best Inspection Frequency Using Pc Swept Technique; Figure 6-54 The List Of All Parameters - Olympus BondMaster 600 User Manual

DMTA-10045-01EN, Rev. E, August 2016
6.2 Advanced Guide for OEM Procedure and Application
Development Using the BondMaster 600
This section contains advanced examples that can be used to develop your own
inspection procedures.
6.2.1 Analyzing Frequency Response in Honeycomb Composite —
Selecting the Best Inspection Frequency Using PC Swept Technique
The pitch-catch (PC) Swept mode of the BondMaster 600 features a new SPECTRUM
representation. This representation is useful for understanding the frequency
response of a given test specimen, and helps you choose the best operating frequency.
The instructions in this section are intended as guidelines for maximizing your
frequency-analysis results. These guidelines are not intended as a direct inspection
setup, but rather explain the importance of each parameter or variable.
Inspection materials are shown in Figure 6-55 on page 161.
160 Chapter 6
Figure 6‑54 The list of all parameters