Olympus BondMaster 600 Getting Started Manual
Composite bond tester
Hide thumbs
Also See for BondMaster 600:
- User manual (248 pages) ,
- Manual avanzado (157 pages) ,
- Advanced manual (157 pages)
Table of Contents
Advertisement
Quick Links
BondMaster 600 Composite Bond Tester
Getting Started Guide
Intended Use
The BondMaster 600 composite bond tester is designed to perform nondestructive inspections of
industrial and commercial materials. Do not use the BondMaster 600 for any purpose other than its
intended use.
Instruction Manual
Before use, thoroughly review the BondMaster 600 User's Manual. Use the product as instructed. The
User's Manual contains essential information on how to use this Olympus product safely and
effectively. Keep the User's Manual in a safe, accessible location.
Safety Signal Words
DANGER
Indicates an imminently hazardous situation and calls attention to a procedure, practice, or the like,
which, if not correctly performed or adhered to, will result in death or serious personal injury
WARNING
Indicates a potentially hazardous situation and calls attention to a procedure, practice, or the like,
which, if not correctly performed or adhered to, could result in death or serious personal injury.
CAUTION
Indicates a potentially hazardous situation and calls attention to a procedure, practice, or the like,
which, if not correctly performed or adhered to, may result in minor or moderate personal injury,
material damage, particularly to the product, destruction of part or all of the product, or loss of data.
BondMaster 600 — Getting Started Guide
1
Advertisement
Table of Contents
Related Manuals for Olympus BondMaster 600
Summary of Contents for Olympus BondMaster 600
- Page 1 Getting Started Guide Intended Use The BondMaster 600 composite bond tester is designed to perform nondestructive inspections of industrial and commercial materials. Do not use the BondMaster 600 for any purpose other than its intended use. Instruction Manual Before use, thoroughly review the BondMaster 600 User’s Manual. Use the product as instructed. The User’s Manual contains essential information on how to use this Olympus product safely and...
-
Page 2: Contents Of The Case
• 8-cell battery holder with connector plug (Olympus P/N: 600-BAT-AA [U8780295]) • Pitch-and-catch and MIA mode cable for BondMaster 600; 3.3 meter (11 foot) length, 11-pin to 11-pin connectors (Olympus P/N: SBM-CPM-P11 [U8800058]) • Resonance mode cable for BondMaster 600; 1.8 meter (6 foot) length, 11-pin to 6-pin connectors (Olympus P/N: SBM-CR-P6 [U8800059]) •... - Page 3 The BondMaster 600 charges the internal lithium-ion battery while it is connected to the AC charger/adaptor. WARNING If the BondMaster 600 is to be used with a rechargeable battery, only use Olympus battery P/N: 600-BAT-L3 [U8051431]. Using any other type of battery might cause an explosion and injury. WARNING The BondMaster 600 charger/adaptor (P/N: EP-MCA-X) is designed to power the BondMaster 600 and charge the lithium-ion battery only (P/N: 600-BAT-L-3 [U8051431]).
- Page 4 NOTE To remove the MicroSD card, gently push the card into the instrument and release. A spring-loaded mechanism will partially eject the card, and then you can grasp and remove it from the instrument. BondMaster 600 — Getting Started Guide...
- Page 5 ) to go back to the BondMaster 600 main screen. Alternatively, if a PowerLink probe is connected to the instrument before it is turned on, the BondMaster 600 starts up in the PowerLink recognition screen, and you can proceed as follows: In the PowerLink recognition screen, load the program stored in the PowerLink probe by pressing the A key.
-
Page 6: Main Inspection Screen
MicroSD memory card is inserted in its slot. This slot is located behind the I/O door on the right-hand side of the instrument. Depending on the context and on the available functions and options, various indicators and numerical values appear on the screen and around the main measurement value. BondMaster 600 — Getting Started Guide... - Page 7 Keypad The BondMaster 600 is available with an English, International, Chinese, or Japanese keypad configuration. English keypad International keypad Chinese keypad Japanese keypad English International Function Enter The Enter key is used to make selections. Return The Return (or, Back) key is used to exit a menu and return to a previous screen.
- Page 8 REF/SAVE Direct function key used to save images and settings in the BondMaster 600 memory. When this key is pressed once (and released), the currently displayed image and settings are saved. When this key is pressed and held, the current BondMaster 600 image is set as the reference memory display.
-
Page 9: Battery Precautions
Hearing Protection CAUTION The BondMaster 600 probes emit audible sounds that easily propagate and that are amplified by the part being tested. The sound level is dependent on numerous factors, including (but not limited to) part composition, frequency, extent of defect(s), and proximity to the part being tested. Under specific test conditions, sound levels in excess of 85 dB have been measured near the probe. -
Page 10: Electrical Warnings
If a non-approved power supply cord not dedicated to Olympus products is used, Olympus will not be able to ensure the electrical safety of the equipment. Equipment Disposal Before disposing of the BondMaster 600, check your local laws, rules, and regulations, and follow them accordingly. BondMaster 600 — Getting Started Guide... - Page 11 BondMaster 600 — Getting Started Guide...
- Page 12 Olympus Scientific Solutions Americas, 48 Woerd Avenue, Waltham, MA 02453, USA www.olympus-ims.com Printed in the United States of America • Copyright © 2014 by Olympus. All rights reserved. All brands are trademarks or registered trademarks of their respective owners and third party entities.