Tutorial (Measuring Procedure) - Olympus USPM-RUIII Series Hardware Operation Manual

2. Tutorial (Measuring Procedure)

2.1. Hardware starting procedure
(1) Turn on the power of the control box.
(2) Turn on the light source power.
(3) Turn on the printer power.
(4) Turn on the personal computer.
2.2. Hardware shutdown procedure
Always close the USPM software and shutdown Windows before turning off the power
to the other devices (in any order).
2.3. Launching procedure for USPM-RU Ver.3.21
(1) After turning on the personal computer, check to make sure that Windows is started and
that the icon screen is displayed.
(2) Double-click the USPM-RU (or USPM-RU440) icon on the desktop, or select
USPM-RU (or USPM-RU440) from the Windows Start menu. The program will be
launched, causing the Main Window to open.
Note: If, in the above operation, the control box has the power switched off, a
communication error will be displayed. If that is the case, click [OK], and when the
menu screen opens, select [File (F)] - [Quit (X)] from the File menu to close the
program briefly.
As the message "Save changes to the configuration file?" will be displayed, select [No].
When you are returned to the icon screen, turn on the power of the control box, and then
click the USPM icon again.
PV6253-F4E016
Failure to follow the procedure may result in abnormal operation.
In such a case, turn of the power again. Then start up the program
according to the following procedure.
4
2. Tutorial (Measuring Procedure)