Combination Switch - Mercedes-Benz G-Class Operator's Manual

Exterior lighting
88
the ignition, the automatic headlamp cleaning
system is reset and counting is resumed from 0.

Combination switch

Turn signal
: High-beam headlamps
Turn signal, right
;
High-beam flasher
=
Turn signal, left
?
To indicate briefly: press the combination
X
switch briefly to the pressure point in the
direction of arrow ; or ?.
The corresponding turn signal flashes three
times.
To indicate: press the combination switch
X
beyond the pressure point in the direction of
arrow ; or ?.
High-beam headlamps
: High-beam headlamps
Turn signal, right
;
High-beam flasher
=
Turn signal, left
?
To switch on the high-beam headlamps:
X
turn the SmartKey in the ignition lock to posi-
tion 2 or start the engine.
Turn the light switch to L or Ã.
X
Press the combination switch beyond the
X
pressure point in the direction of arrow :.
In the à position, the high-beam head-
lamps are only switched on when it is dark and
the engine is running.
The blue K indicator lamp in the instru-
ment cluster lights up when the high-beam
headlamps are switched on.
To switch off the high-beam headlamps:
X
move the combination switch back to its nor-
mal position.
The blue K indicator lamp in the instru-
ment cluster goes out.
High-beam flasher
: High-beam headlamps
; Turn signal, right
High-beam flasher
=
Turn signal, left
?
To switch on: turn the SmartKey in the igni-
X
tion lock to position 1 or 2, or start the engine.
Pull the combination switch briefly in the
X
direction of arrow =.