Driving Systems - Mercedes-Benz G-Class Operator's Manual

Driving systems

Display messages
TC shift conditions
not fulfilled
Apply the brake/
parking brake
TC malfunction
Consult workshop
about applying the
parking brake
TC shift canceled
Reactivate
TC shift conditions
not fulfilled
Max. speed 25 mph
TC shift conditions
not fulfilled
Select NEUTRAL gear
TC shift conditions
not fulfilled
Max. speed 40 mph
LOW RANGE
ON
HIGH RANGE
ON
Differential lock
only available in
LOW RANGE
Possible causes/consequences and M Solutions
The parking brake has not been applied and the brake pedal has not
been depressed. The transfer case has canceled the gear change
process and is in Neutral. There is no connection between the engine
and the drive wheels.
Pull over and stop the vehicle safely as soon as possible, paying
X
attention to road and traffic conditions.
Depress the brake pedal and apply the parking brake.
X
Shift the automatic transmission to neutral position N.
X
Make sure all conditions for changing gears are met (
X
Repeat the gearshift process.
X
There is a malfunction in the transfer case.
Do not shift the transfer case.
X
When parking, secure the vehicle against rolling away (
X
Have the vehicle checked at a qualified specialist workshop.
X
The transfer case has not performed the gear change process.
Repeat the gearshift process.
X
Make sure all conditions for changing gears are met (
X
You have exceeded the maximum speed for the gearshift process.
Drive more slowly.
X
Repeat the gearshift process.
X
You have not met one or more shift conditions.
Shift the automatic transmission to neutral position N.
X
Repeat the gearshift process.
X
You have exceeded the maximum speed for the gearshift process.
Drive more slowly.
X
Repeat the gearshift process.
X
The transfer case is in the LOW RANGE off-road position.
The transfer case is in the HIGH RANGE on-road position.
The LOW RANGE button has been pressed. The transfer case is in the
LOW RANGE off-road driving position and a differential lock is
engaged.
Disengage the differential locks (
X
Repeat the gearshift process.
X
Display messages
Y
Y
Y
page 164).
Y
195
page 162).
page 130).
page 162).
Z