Table of Contents
Advertisement
Combination Switch
1 Low beam (turn lighting switch
clockwise tw o notches)
2
High beam (turn lighting switch
clockwise tw o notches)
3
High beam flasher (high beam
available independent of lighting
switch position)
4 Turn signals, right
5 Turn signals, left
To operate the turn signals, move the
com bination switch past the point of
resistance (up or down). The sw itch is
automatically cancelled when the
steering wheel is turned by a large
enough angle.
To signal m inor directional changes of
the vehicle, such as changing lanes
on a highway, move com bination
switch to the point of resistance only
and hold it there.
6
C ontrol fo r windshield washer
system
When the washer system is
sw itched on, the w ipers also
operate.
7
W indshield wiper control
0
W indshield w iper switched off
1
Interm ittent wiping
II
Normal w iper speed
III High w iper speed
Hints:
If one of the turn signals fails, the turn
signal indicator system flashes and
sounds at a faster sequence than
under normal operating conditions.
Fog lamps will only operate together
with low beam headlamps. Fog lamps
are turned off autom atically when
lighting switch is returned to off-
position.
Controls
23
Advertisement
Table of Contents
