Tail Lamp - Mercedes-Benz G-Class Operator's Manual

Front side marker lamp (example)
The bulbs of the front and rear side marker
lamps are changed in the same way.
Switch off the lights.
X
Unscrew screws :.
X
Remove housing ;.
X
Remove dust cover =.
X
Push the catch to the side and pull the bulb
X
holder with the bulb out of housing ;.
Lightly press bulb ?, turn it counter-clock-
X
wise and pull it out.
Insert the new bulb and, applying slight pres-
X
sure, turn it clockwise until it engages.
Insert the bulb holder into housing ;.
X
Attach dust cover =.
X
Insert housing ;.
X
Replace and tighten screws :.
X
Changing the rear bulbs
Protection grille (AMG vehicles)
!
Make sure that the protective grille does not
hit any painted surfaces.
You could otherwise damage the paintwork.
Protection grille (AMG vehicles)
You must remove the protective grille before
you can change the bulbs in the tail lamps.
Unscrew screws ;.
X
Swing protection grille : to the right.
X
After changing the bulbs, swing protection
X
grille : to the left.
Tighten screws ;.
X
Tail lamps
!
When installing the lens, make sure that the
seal is positioned correctly.
!
Do not fasten the screws too tightly. You
could otherwise damage the lens.
Replacing bulbs
Z
95