Server Notes - Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF Configuration Manual

Fibre channel/ eternus dx500 s4/dx600 s4, eternus dx500 s3/dx600 s3, eternus dx8700 s3 hybrid storage systems, eternus dx400 s2 series, eternus dx8700 s2 disk storage systems, eternus af650 s2, eternus af650 all-flash arrays settings for bs2000 connection

Hide thumbs

Table Of Contents

Table of Contents

Chapter 2 Notes

2.3 Server Notes

2.3

Server Notes

Before turning the server on, check that the ETERNUS DX/AF storage systems and Fibre Channel switches are

all "Ready". If the server is turned on and they are not "Ready", the server will not be able to recognize the

ETERNUS DX/AF storage systems.

Storage replication functions (local and remote) are performed by SHC-OSD (subsystem of BS2000) instead of

ETERNUS SF AdvancedCopy Manager.

SE Server (SU /390) and S-Server:

Before an online firmware update in the ETERNUS DX/AF storage system is performed, the timeout value for

the affected disks in the BS2000 must be increased to 2.5 minutes using the command /MODIFY-IO-UNIT. After

completion of the update, the standard timeout (1 minute) must be reset via /MODIFY-IO-UNIT.

For online firmware upgrades in 'operator intervention mode', additional conditions apply. Please respect

'important notices' and 'restrictions' in the storage bulletins.

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-

P3AM-5672-10ENZ0

Table of Contents

Server Notes - Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF Configuration Manual

2.3 Server Notes

Related Manuals for Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF

Related Content for Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF

Table of Contents