Chapter 4 Setting Backup Software
4.5 NetVault
9
10
11
4.5.2
Notes on Using Windows Server 2019
To use NetVault on Windows Server 2019, ETERNUS LT series Tape Library Driver is required.
Install the Windows Server 2016 device driver (w2k16) in Windows Server 2019.
For the download and the installation procedure of the Tape Library Driver, refer to the following website.
https://www.fujitsu.com/global/support/products/computing/storage/download/
FUJITSU Storage ETERNUS LT140 Tape Library User's Guide -Server Connection-
Click the [Cleaning] tab in the [Configure Device] page that appears, set the following Cleaning
items, and click the [OK] button.
•
Automatic Cleaning Supported: on (the default setting is "on")
•
Barcode Prefix(es) of cleaning media: Set with the character string that is on the label of the
cleaning cartridge.
•
Cleaning Slots: Slot number where a cleaning cartridge is stored.
The following is a settings example with a label string of "CLN" and a slot number of "5".
Click the [OK] button to go back to the [Edit Device] page and then click the [Save] button at the
bottom right of the page.
In the [Manage Devices] page of the WebUI, click the [Manage Library] button of the target
library to switch to the [Tape Library Management] page.
Reboot the LT140 by clicking the [Restart] button at the bottom right of the page.
The new settings are applied after the LT140 is rebooted.
Copyright 2019 FUJITSU LIMITED
49
End of procedure
P3AG-3752-03ENZ0