Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF Configuration Manual page 4

About this Manual
Naming Conventions
- Product names
• BS2000 represents the following products:
- Other names
• "Channel Adapter" (CA) refers to the Fibre Channel interface module that is used in an ETERNUS DX/
AF storage system to connect to a server.
• "Fibre Channel card" refers to the Fibre Channel interface module that is normally used by the
server. A "Host Bus Adapter" (HBA) or "Channel Adapter" (CA) may be used instead, depending on
the server.
• Italics are used to show variables such as values and characters that appear in command
parameters and output examples.
- ETERNUS disk storage system models
The following naming conventions are used to describe ETERNUS disk storage system models in this
document.
ETERNUS DX500 S4/DX600 S4
ETERNUS DX500 S3/DX600 S3
ETERNUS AF650/AF650 S2
ETERNUS DX8700 S3
ETERNUS DX410 S2/DX440 S2
ETERNUS DX8700 S2
ETERNUS DX500 S4/DX600 S4
ETERNUS DX500 S3/DX600 S3
ETERNUS DX8700 S3
ETERNUS DX410 S2/DX440 S2
ETERNUS DX8700 S2
ETERNUS AF650/AF650 S2
- BS2000 servers:
The following naming conventions are used to describe BS2000 server models in this document.
SE300, SE500, SE700, SE300B, SE500B, SE700B
S175, S210
SQ210
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
• BS2000/OSD V9.0
• OSD/BC V10.0
• OSD/BC V11.0
• OSD/XC V9.0
• OSD/XC V9.5
• OSD/XC V10.0
• OSD/XC V11.0
ETERNUS disk storage system model
BS2000 server model
Copyright 2018 FUJITSU LIMITED
ETERNUS DX/AF storage system
ETERNUS DX S4 series
ETERNUS DX S3 series
ETERNUS DX S2 series
ETERNUS AF series
SE Server series
S-Server series
SQ-Server series
4
Naming conventions
Naming conventions
P3AM-5672-10ENZ0