Chapter 6 Check The Luns; Se Server (Su /390) And S-Server; Se Server (Su X86) And Sq-Server - Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF Configuration Manual
Fibre channel/
eternus dx500 s4/dx600 s4, eternus dx500 s3/dx600 s3, eternus dx8700 s3 hybrid storage systems,
eternus dx400 s2 series, eternus dx8700 s2 disk storage systems,
eternus af650 s2, eternus af650 all-flash arrays settings for bs2000 connection
Table of Contents
Advertisement
Chapter 6
Check the LUNs
If VM2000 is in use, disks must be assigned to a guest VM by VM2000 administration (/ADD-VM-DEVICES).
6.1
SE Server (SU /390) and S-Server
Use /ATTACH-DEVICE and /SHOW-DISK-STATUS for checks by means of BS2000, resp. /SHOW-STORAGE-DEVICE-
CONFIG for checks by means of SHC-OSD.
6.2
SE Server (SU x86) and SQ-Server
The ETERNUS DX/AF storage system and the new devices must be visible from the X2000. Please check by
using Web GUI or by using the X2000 command "emptool display paths" for the SQ-Server and the SE Server.
Use /ATTACH-DEVICE and /SHOW-DISK-STATUS for checks by means of BS2000, resp. /SHOW-STORAGE-DEVICE-
CONFIG for checks by means of SHC-OSD.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
23
Copyright 2018 FUJITSU LIMITED
P3AM-5672-10ENZ0
Advertisement
Table of Contents
