Bs2000 Software Prerequisites; Fibre Channel Cards - Fujitsu ETERNUS DX S2, ETERNUS DX S3, ETERNUS DX S4, ETERNUS AF Configuration Manual

Chapter 3 Checking Prerequisites and Fibre Channel Card Information

3.3 BS2000 Software Prerequisites

3.3 BS2000 Software Prerequisites
Support of the ETERNUS DX Storage Systems is provided as of the following versions:
■ ETERNUS DX S2/S3:
• SE Server:
• S-Server:
• SQ-Server:
■ ETERNUS AF650/AF650 S2/ETERNUS DX S4:
• SE Server:
• S-Server:
Correction Package 1/2017
3.4

Fibre Channel Cards

Obtain the WWN information of the Fibre Channel card of a BS2000 Server.
SE Server:
Obtain the WWN via the Management Unit (MU):
- Select "Units" in the dashboard
- Expand the Server Unit
- Select "Information" --> "FC Interfaces", see column "WWPN"
S-Server:
Obtain the WWN from S-Servers via the SKP:
- open SVP-FRAME
- execute MODE SELECTION FRAME
- select CH (CH/SUBCH STATUS) and call the CH/SUBCH STATUS DISPLAY FRAME
- execute Function 4 (FC PORT STATUS):
- the field SELF P-NAME shows the WWN
SQ-Server:
Use the command below to get the WWN:
chk_conf -c
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
OSD/XC V9.5, SHC-OSD V11.0
OSD/BC V9.0, SHC-OSD V11.0
OSD/XC V9.0, SHC-OSD V11.0
SE V6.2, OSD/XC V10.0, SHC-OSD V13.0
OSD/BC V10.0, SHC-OSD V13.0
13
Copyright 2018 FUJITSU LIMITED P3AM-5672-10ENZ0