11.3 Alignment parameters
The "alignment point" is deined as the position inside the ticket to use for the notch alignment.
The distance between the notch edge and the alignment point is deined as "Notch Distance".
Referring to the front of the notch, the value of "Notch Distance" varies according to emulation set:
- VKP80III emulation:
"Notch/Distance" value varies from -5 mm minimum and 99.9 mm maximum
- VKP80II emulation:
"Notch/Distance" value varies from 0 mm minimum and 32 mm maximum.
If the "Notch Distance" value is set to 0, the alignment point is set at the beginning of the notch.
positive values
of "Notch Distance"
90
Alignment
Alignment
point
point:
notch front
+
0
Alignment
point
PRINTING DIRECTION
negative values
-
of "Notch Distance"