10.2 Paper roll holder
A paper roll holder kit (code 974DX010000001) is available for the device to make it possible to use larger-width rolls of
paper (max. Ø150 mm). The roll holder mounts rolls with width comprised between 60 mm and 82.5 mm.
The paper roll holder can be only assembled on the right side of the device as shown in the following igures.
The kit includes (see igure):
1. Paper holder support with low paper sensor and regulating system for paper width.
2. Cable ties (x3)
3. Fixing screws (x5)
4. Extension cable
5. Installation instruction
NOTE:
To assemble the kit refer to the instruction sheet enclosed with the kit.
82
1
2
3
4
5