Cleaning - Custom Audio Electronics VKP80III User Manual

7.2 Cleaning

For periodic cleaning of the device, see the instructions below
Sensors
1
Disconnect the power supply cable and
open the device cover (see par. 4.4).
2
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
Clean the device sensors
by using compressed air.
58
ON
Alcohol, solvent
Paper path
1
Disconnect the power supply cable and
open the device cover (see par. 4.4).
2
ATTENTION:
Do not use alcohol, solvents, or hard brushes.
Do not let water or other liquids get inside the machine.
Remove any scraps of paper and the accumulated
paper dust on the paper mouths, on the printing roller,
on the cutter and on the area around the sensors.
ON
Alcohol, solvent