Pairing To The Point Of Sale - VeriFone Presto Smart e355 User Manual

4.0 Pairing to the Point of Sale.

Your Presto Smart e355 terminal needs to be paired to the Point of Sale (POS)
prior to use. The pairing has a time limit of 60 seconds, if the pairing takes longer
than 60 seconds then the solution will time out.
Note: The actions of the POS will differ depending on the POS vendor solution.
Step Terminal Display
1
Please pair this
device with your
Point of Sale
(POS) system.
2
On your (POS)...
1. Enable pairing mode
2. Enter IP address 127.0.0.1
on network 'win_sim SSID'
Network: win_sim SSID
IP address: 127.0.0.1
Pair with POS
Action
The Network name and the IP address
associated with the terminal will be displayed
on the home screen.
For the Network name:
•
If WiFi is the comms type enabled
for Presto Smart VX-90 then the
'WiFi SSID name' will be displayed.
• If ETH is the comms type enabled for
Presto Smart VX-90 then 'Ethernet (wired)'
will be displayed.
Press "Pair with POS" on the terminal screen
to continue.
This screen will display the IP address
required by the POS to initiate the pairing.
13