Control Panels
_____
____
_____
____
_____
____
_____
____
_____
____
_____
____
_____
____
_____
____
_____
____
_____
____
_____
____
Caution!
Any points programmed as fire supervisory points are latching.
!
Point Profile
Point Source
Point Area
Point Name
1.
2.
3.
4.
5.
6.
7.
8.
9.
10. Press Save or Enter. The keypad shows Parameter saved.
11. Press Area or use
12. Press Edit or Enter to edit the area for the selected point.
13. Use
14. Press Save or Enter. The keypad shows Parameter saved.
15. Press Name or use
16. Press Edit or Enter to edit the name for the selected point.
17. Delete the existing characters, if necessary, and enter the new characters.
18. Press Save or Enter. The keypad shows Parameter saved.
Bosch Security Systems, Inc.
(1)
___
(1)
___
(1)
___
(1)
___
(1)
___
(1)
___
(1)
___
(1)
___
(1)
___
(1)
___
(1)
___
Enter the installer passcode, and then open the [1] Installer Menu.
Go to [1] Programming Menu > [7] Points.
Enter the point number and press Enter, or use
desired point.
Press Edit or Enter to edit the profile for the selected point.
Use
/Previous or
/Next to go the desired profile.
Press Save or Enter. The keypad shows Parameter saved.
Press Source or use
Press Edit or Enter to edit the source for the selected point.
Use
/Previous or
/Next to go the desired source.
/Next to go to the area option.
/Previous or
/Next to go to the source option.
_____
_____
_____
_____
_____
_____
_____
_____
_____
_____
_____
/Next to go to the source option.
/Next to go the desired area.
Installation Manual
Keypad Installer menu | en 119
____
____
____
____
____
____
____
____
____
____
____
/Previous or
/Next to go to the
2018.07 | 16 | F.01U.287.180
(1)
___
(1)
___
(1)
___
(1)
___
(1)
___
(1)
___
(1)
___
(1)
___
(1)
___
(1)
___
(1)
___