Table of Contents
Advertisement
Security Escort
3.4.2
Point tracking transmitter
Features
–
–
–
–
Description
The Point Tracking Transmitter contains a unique code that is associated with the item
attached to the transmitter. During an alarm, the transmitter sends this code to the Central
Console. The Central Console software displays the item's photograph, location on a map, and
any relevant information.
Supervision
The transmitter can send a tracking signal to the Central Console every 60 minutes (user
configurable), updating the transmitter's location. During periods of inactivity, the transmitter
sends one status and location report to the Central Console every hour. To reset the
transmitter, restore all device conditions such as tamper, loop, and magnet, to normal.
Manual Duress Alarm
During an alarm, the transmitter automatically continues to transmit every 7 seconds,
providing the most current location information.
Low Battery Indication
At test mode, when the transmitter's battery needs replacement, a low battery message
appears on the Central Console.
Reed Switch or External Input
The transmitter has the capacity to monitor magnetic and/or dry external contacts. External
Normally Closed (NC) or external Normally Open (NO) contacts can be monitored.
Temperature Range
Battery
Communication Interface
Frequency
Robert Bosch (SEA) Pte Ltd
Supervision.
Manual duress alarm.
Low battery indication.
Flexible mounting options.
Technical Reference Manual
System components and specifications | en
-20°C to 65°C (-4°F to 150°F)
3V Lithium or equivalent
Wireless radio frequency (SE coordinator/SE receiver)
433.42 MHz
19
2018.03 | SE3v1.0 | DOC
Advertisement
Table of Contents
