Appendix; Reset The Device - Omron Avail PM601 Instruction Manual

AppENdIx

rESET THE dEVICE

To reset the device, follow the steps below:
1. Reset the Device
Press the reset button on the back of the device.
2. Reset the Bluetooth Information in Your Smartphone
2-1. Open "Settings" of your smartphone's Operating System (OS)*.
2-2. Tap "Bluetooth" and find "PM601",
then tap .
2-3. Tap "Forget This Device".
3. Reset the App Settings
3-1. Open the Omron TENS app and tap
3-2. Tap "Forget All Devices".
*This section explains the steps using iOS 10 as an example. If you're
using an another OS, refer to your smartphone's instructions.
Try step 1 if any of the following situations occur:
Try step 1 and 2 if the following situation occurs:
C
PM601 Connected
Try step 1, 2 and 3 if any of the following situations occur:
to open the settings.
32
• There is no response when the device's power button is pressed.
• You want to clear all the information stored in your device.
• You changed the smartphone to new one.
• You received another person's device that was paired with his/her
smartphone.
• The Omron TENS app was uninstalled and installed again.
• The device was lent to someone and it was returned to you after
being used.
• The Omron TENS app is unresponsive even after it is reinstalled.