JBL ES250PW Service Manual page 5

ES250PW
Parameter
Auto Mute/ Turn-OFF Time
Tx Features
LFE Input
Channel ID switch
External power supply
requirements
Power consumption
Tx Standby Input Power
Tx Standby input current
Tx Idle Power
Tx Idle Power
Power supply adapter
Manufacturer / model
Output Voltage
Max output current
Rating
AC input voltage range
AC input frequency
Power supply weight
AC power cord type
Power supply certification
Other Parameters/Notes:
1. Volume control should be at the input buffer stage in order to lessen the possibility of clipping the input section with highly dynamic audio material.
2. ALL SPECS SHOULD BE MEASURED AT NOMINAL LINE VOLTAGE.
Downloaded from www.Manualslib.com
Specification Unit
5-15 minutes
--
YES --
YES
18 VDC
1 Watts
0.019 Amperes
2.34 Watts
1.64 Watts
18 VDC
0.4 ADC
7.2 VA
100-240 VAC
50-60 Hz
0.246 Lbs
n/a
YES
--
manuals search engine
QA Test
Conditions
Limits
T before muting, after signal is
5-15
removed
functional
functional
functional
Reference 120VAC line voltage
Reference 120VAC line voltage
Reference 120VAC line voltage
Reference 120VAC line voltage
Reference
Reference @ Nom. line voltage
Reference
Reference
Reference
Reference
Reference 112 grams
Detachable, interchangeable via a
Functional 2 Pole IEC receptacle EN 60320
C7
Power supply should be certified
Reference under the applicable standards for
its end use EN/IEC 60065:2002
4
Notes
Auto turn of time (T) must be 5 > T < 15
Minutes
Single RCA Connector
4 Position switch, to select wireless channels
System provided with Power supply model
GPE-152, delivering 18VDC @ 400mA
RED LED
RED LED
Unit in operation Locked to Rx section Solid
GRN
Unit in operation NOT locked to Rx section
GOLDEN PROFIT ELECTRONICS LTD. GPE-
152-180040W
Universal type power supply
230V model will include SCHUKO and UK
cords, 120V includes 120V US cord only
TUV/PSE