Connecting
4.9 EMC guidelines
4.9.5
Inverter shielding in detail, FSA to FSC
The figure below shows the necessary shielding of the Power Module.
Figure 4-9
If a terminal wiring of the Control Unit is required, a shielded cable has to be used. The cable
shield has to be connected to the gland plate via an electrically conductive PG gland.
This cable has to be fed through the left-hand hole of the gland plate, especially on frame
size C filter class B Power Modules.
58
Power Module shielding, FSA ... FSC
Hardware Installation Manual, 11/2014, A5E35319202B AA
PM230 Power Module IP55