HP IntelliJack NJ1000G Quick Start Manual page 13

3 Pull the NJ1000G down to lock the hooks tightly into the slots. Be
sure to match the screwholes in the bracket and the NJ1000G.
Secure the NJ1000G using the T-10 torx screw that came in the
NJ1000G package
8. Connect the Local Power Supply (Optional)
If the network does not support PoE, you can use the optional local power supply. To
connect the local power supply to the NJ1000G, follow these steps:
1 Connect the round connector of the local power supply to the
NJ1000G (as shown in the next diagram).
2 Plug the power cord of the local power supply into an AC outlet.
WARNING: Use only the local power supply available from HP. Failure to do so
may result in damage to the NJ1000G or may result in a hazardous situation.
13