HP IntelliJack NJ1000G Quick Start Manual page 10

NOTE: If you are installing the NJ1000G into a wall junction box, make sure that
there is enough space between the back of the NJ1000G and the inside of the
junction box to maintain an acceptable bend radius on the cable.
To ensure proper horizontal cabling functionality, adhere to the following

network cabling standards during installation:
ANSI/TIA/EIA-568

Commercial Building Telecommunications Cabling Standard
ANSI/TIA/EIA-569

Commercial Building Standard for Telecommunications Pathways and Spaces
4. Attach the Wall-Mount Bracket
Attach the included wall-mount bracket to the wall opening as shown in this
diagram.
10