Johnson Controls WT-4002-MCR Installation Instructions Manual page 19

12. Set the Weekday 2 schedule (Figure 26).
Weekday 2
Unoccupied
18:00
85
Figure 26: Setting the Weekday 2 Schedule
a. Press the Up button
to navigate to Weekday 1.
-
b. Press to highlight the selection.
c. Press the Up button
to change the selection to Weekday 2.
-
d. Press to save the setting.
e. Press the Up button
to scroll through the occupancy mode,
-
start time, upper temperature limit, and lower
temperature limit menu items.
WT-4000 Series Pneumatic-to-Direct Digital Control (DDC) Room Thermostats Installation Instructions
55
or the Down button
+
or the Down button
+
or the Down button
+
f. Press to open a specific menu item.
g. Press the Up button
to change the value, then press
-
save the setting.
13. While in the configuration menu, use the Up/Down
buttons to navigate to Weekend (Figure 27).
Standalone
Date & Time
Weekday
Weekend
Figure 27: Selecting Weekend
14. Program the weekend schedule in a similar
manner as the weekday schedule.
15. Once all programming is complete, press
exit the Configuration Mode.
19
or the Down button
+
to
to