Johnson Controls WT-4002-MCR Installation Instructions Manual page 16

The start time of each schedule part is automatically
the end time of the previous schedule part. For
example, when the occupied schedule is 6 A.M. to
6 P.M., the Occupied Mode starts at 6 A.M. and the
Unoccupied Mode starts at 6 P.M. Figure 18 and
Figure 19 illustrate the Occupied and Unoccupied
Mode schedule setup.
Occupied or Unoccupied
(Defines the occupancy
mode of the part.)
Setpoint Temperature
(Defines the Occupied Mode
setpoint temperature of the part.)
Figure 18: WT-4000 Series Pneumatic-to-DDC Room Thermostat
Occupied or Unoccupied
(Defines the occupancy
mode of the part.)
Upper Temperature Limit
(Defines the Unoccupied Mode
upper temperature limit of the part.)
Figure 19: WT-4000 Series Pneumatic-to-DDC Room Thermostat
WT-4000 Series Pneumatic-to-Direct Digital Control (DDC) Room Thermostats Installation Instructions
Weekday 1
Occupied
07:00
70
Schedule Setup Screen for Occupied Mode
Weekday 2
Unoccupied
18:00
85
Schedule Setup Screen for Unoccupied Mode
16
Weekday 1, Weekday 2,
Weekend 1, or Weekend 2
(Defines which part is being edited.)
Time in 24-Hour Format
(Defines the start time of the part.)
Weekday 1, Weekday 2,
Weekend 1, or Weekend 2
(Defines which part is being edited.)
Time in 24-Hour Format
(Defines the start time of the part.)
55
Lower Temperature Limit
(Defines the Unoccupied Mode
lower temperature limit of the part.)