Honda CR-V Owner's Manual page 89

uuIndicatorsu
Indicator Name
*2
M (sequential
shift mode)
Indicator/Gear
*3
Position
Indicator
Seat Belt
Reminder
Indicator
*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
*2:5-speed automatic transmission models
*3:9-speed automatic transmission models
* Not available on all models
88
On/Blinking
Comes on when the manual sequential
●
shift mode is applied.
*
Comes on if you are not wearing a seat
●
belt when you turn the ignition switch
to ON ( w *1 .
If the front passenger is not wearing a
●
seat belt, the indicator comes on a few
seconds later.
Blinks during driving if either you or the
●
front passenger has not fastened a seat
belt. The beeper sounds and the
indicator blinks at regular intervals.
Explanation
2 Sequential Shift Mode P. 408
The beeper stops and the indicator
●
goes off when you and the front
passenger fasten their seat belts.
Stays on after you or the front
●
passenger has fastened the seat
belt - A detection error may have
occurred in the sensor. Have your
vehicle checked by a dealer.
2 Seat Belt Reminder P. 41
Message
—