Injecting Sealant And Air - Honda CR-V Owner's Manual

■

Injecting Sealant and Air

Tyre Valve Stem
Valve Cap
Tyre Valve Stem
Sealant/air hose
Bottle Adapter Bottle Cap
Air Compressor Hose
1. Remove the valve cap from the tyre valve
stem.
2. Shake the sealant bottle.
3. Attach the sealant/air hose onto the tyre
valve stem. Screw it until it is tight.
u Make sure the bottle remains upright to
ensure all the sealant flows into the
tyre.
4. Remove the bottle cap from the bottle
adapter.
5. Attach the air compressor hose onto the
bottle adapter. Screw it until it is tight.
uuIf a Tyre Goes FlatuTemporarily Repairing a Flat Tyre
1Injecting Sealant and Air
WARNING
3
Tyre sealant contains substances that are
harmful and can be fatal if swallowed.
If accidentally swallowed, do not induce
vomiting. Drink plenty of water and get
medical attention immediately.
For skin or eye contact, flush with cool
water and get medical attention if
necessary.
Keep the sealant bottle out of the reach of children.
Do not shake the bottle after the bottle cap removed.
If you shake the bottle after the cap removed, it may
spill sealant.
In cold temperatures, the sealant may not flow easily.
In this situation, warm it up for five minutes before
using.
The sealant is latex based and can permanently stain
clothing and other materials. Be careful during
handling and wipe up any spills immediately.
Continued
613