9-speed automatic transmission models
Message
Appears when the transmission system temperature is
●
too high. The vehicle does not operate properly.
Appears when you try to change the gear position
●
without depressing the brake pedal.
Appears if you change the gear position to
●
depressing the brake pedal.
Appears when you try to change the gear position
●
without releasing your foot off the accelerator pedal.
Condition
(
P without
uuIndicatorsuDisplay Warning and Information Messages
Explanation
You may find it difficult to accelerate, or to start the
●
vehicle on uphill.
Stop in a safe place in
P .
(
●
Let the engine idle until the message disappears.
●
Depress the brake pedal, then change the gear position.
●
In freezing or sub-freezing conditions, the electronic
●
gear selector response may be slow. Always depress the
brake pedal before changing the gear position to
and confirm that
P is shown on the gear position
(
indicator before releasing the brake.
Depress the brake pedal, then change the gear position
●
to
P .
(
Release your foot off the accelerator pedal, then change
●
the gear position.
(
P ,
125
Continued