How To Set Up The Jack - Honda CR-V Owner's Manual

uuIf a Tyre Goes FlatuChanging a Flat Tyre
■

How to Set Up the Jack

606
*
1. Place the jack under the jacking point
closest to the tyre to be changed.
2. Turn the end bracket clockwise as shown in
the image until the top of the jack contacts
the jacking point.
u Make sure that the jacking point tab is
resting in the jack notch.
1How to Set Up the Jack
WARNING
3
The vehicle can easily roll off the jack,
seriously injuring anyone underneath.
Follow the directions for changing a tyre
exactly, and no person should place any
portion of their body under a vehicle that is
supported by a jack.
WARNING: The jack shall be placed on a flat and
stable surface on the same level as the vehicle is
parked.
The jack that came with your vehicle has the
following label.
1. See Owner's Manual.
2. Never get under vehicle when supported by jack.
3. Place jack underneath reinforced area.