Adjusting The Clock; Using The Menu Button; Using The Setup Button - Honda CR-V Owner's Manual

Clock

Adjusting the Clock

You can adjust the time in the clock display with the ignition switch in ON
Models without audio system
■

Using the MENU button

1. Press the MENU button.
2. Select Adjust clock with the
Audio system with one display
■

Using the SETUP button

1. Press the SETUP button.
2. Rotate to select Adjust clock, then press
3. Rotate to select the item you want to change (12/24 hour mode, hour,
minute). Then press
4. Rotate to make the adjustment.
5. Press to enter your selection. The display returns to Adjust clock. Repeat steps
4 to 6 to adjust other items.
6. To enter the selection, Rotate
7. Press the SETUP button to go back to the normal display.
*1: Models with the keyless access system have an ENGINE START/STOP button instead of an
ignition switch.
156
+ / - button, then press the SOURCE button.
( (
3. Press the ( + / ( - button to change the
setting between 12h and 24h.
4. Select hours or minutes with the
button.
5. Press the + / - button to adjust the
( (
numbers up or down.
6. Select Set with the
press the SOURCE button to enter your
selection.
.
.
and select Set, then press
*1 .
( w
1Adjusting the Clock
Models with navigation system
The clock is automatically updated through the
navigation system, so the time does not need to be
adjusted.
Audio system with one display
These indications are used to show how to operate
the selector knob.
Rotate
/
Press
/ button, then
.
to select.
to enter.