Message
Appears once if the outside temperature is below 3°C
●
while the ignition switch is in ON
Appears when any of the rear seat belts are latched or
●
unlatched, or either rear door is opened and closed.
Appears when the engine coolant temperature gets
●
abnormally high.
Appears when there is a problem with the high beam
●
support system
Models without Forward Collision Warning
Appears when the high beam support system
●
lens gets dirty.
*1:Models with the keyless access system have an ENGINE START/STOP button instead of an ignition switch.
* Not available on all models
Condition
*1
.
(
w
*
.
uuIndicatorsuDisplay Warning and Information Messages
There is a possibility that the road surface is icy and
●
slippery.
2 Seat Belt Reminder P. 41
2 Overheating P. 631
If you are driving with the high beam headlights when
●
this happens, the headlights are changed to low beams.
Manually operate the headlight switch.
●
Stop in a safe place and clean the camera lens with a
●
*
camera
soft cloth.
If the message does not disappear after cleaning the
●
lens, have your vehicle checked by a dealer.
Explanation
Continued
111