Random Access Adjustment Mode Selection Menu; Picture Tuning; Color Balance; Sync Fast/Slow Adjustment - Runco DTV-992 ULTRA Owner's Operating Manual

Random Access Adjustment Mode

Random access adjustment mode selection menu

This is the main menu for the Random Access adjustment mode.
Through this menu, the following adjustments and features are accessible:

- Picture Tuning

Sync slow/fast (video/s-video)

Color Balance

- Geometry
Convergence
- Color Select
And also Orbiting, Contrast modulation and Soft Edge, if these options are
installed.
Picture Tuning
Highlight Picture tuning by pushing the control disc up or down and press
ENTER.
The Picture tuning menu will be displayed.
Depending on the input source, the 'Picture tuning' menu will display differ-
ent items.
- Color Balance
- Sync slow/fast
- Peaking
Color Balance
The Color Balance function is used to select or adjust the color temperature
of white used by the projector.
The Color Balance can be adjusted in two different ways:
- fixed color balance. You have the choice between 3200k (reddish), 5400
K, 6500 K (white), or 9300 K (bluish).
- Custom white and black balance.
Fixed Color Balance
Highlight one of the 4 programmed color temperatures with the control disc
and press ENTER to display the desired color balance.
Custom Color Balance
Select custom white balance by pushing the control disc up or down and
press ENTER to start the adjustment.
Push the control disc up or down to adjust the red gain and push the control
disc to the left or right to adjust the blue gain. A bar scale indicates the
amount of adjustment.
Select custom black balance with the control disc and press ENTER to start
the adjustment.
Push the control disc up or down to adjust the red cut-off and push the con-
trol disc to the left or to the right to adjust the blue cut-off.
When the color balance is adjusted, select continue by pushing the control
disc up or down and press ENTER.

Sync Fast/Slow Adjustment

The sync function is used to minimize horizontal jittering or tearing at the
top to the displayed image.
Highlight SYNC with the control disc and press ENTER to toggle between
FAST and SLOW.
Note: SYNC is normally used in the SLOW position. The FAST position is
used to compensate for unsteady sync pulses from older video playback
equipment, such as a VCR.
ENTER will toggle Sync between FAST and SLOW.
EXIT will return to the Random Access Adjustment menu.
6-3
RANDOM ACCESS
ADJUSTMENT MODE
PICTURE TUNING
GEOMETRY
CONVERGENCE
COLOR SELECT
Select with
or
then <ENTER>
<EXIT> to return
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PEAKING : ON
Select with
or
<ENTER> to accept
<EXIT> to return.
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PEAKING : ON
COLOR BALANCE
Select with
or
<ENTER> to accept
FIXED COLOR BALANCE
<EXIT> to return.
3200 5400 6500 9300
CUSTOM WHITE BALANCE
CUSTOM BLACK BALANCE
Select with arrow keys
then <ENTER>
You can
adjust red with
or
Blue with
or
<EXIT> to return
PICTURE TUNING
COLOR BALANCE
SYNC : FAST
PEAKING : ON
Select with
or
<ENTER> to accept
<EXIT> to return.